Water dispenser 2 (i.e. hot water purifier)
Product features: 1. Instant water dispenser can easily enjoy fresh and healthy water without waiting; The water temperature of the traditional water dispenser is up to 85 degrees. Compared with the instant water dispenser, the water temperature of the instant water dispenser can reach about 95 degrees, which is more than 10 degrees higher than that of the traditional water dispenser; At the same time, compared with the traditional water dispenser, his standby is close to zero power consumption, which is 50% more energy-saving and power-saving than the traditional water dispenser; 2. Power on for standby. When the corresponding temperature is ed, the indicator light on the corresponding temperature is on. Press the handle to discharge the water with the original set temperature from the water outlet, and then press the handle to stop working; 3. When working, the flow will be accumulated and stored in the control chip. When the flow exceeds 200l, the reset light is always on, indicating that the filter element needs to be replaced.
Detail
Function Description:
1. Water temperature at the water outlet: normal temperature water, 50 ℃, 60 ℃, 85 ℃ and 100 ℃;
2. Switch on / off key, long press this key to enter the controller self-test mode;
3. Press the child lock key for three seconds to enter the child lock state, other functions do not act, and then press this key for three seconds to return to the function state. The light is on when the child is locked, off when unlocking, and the buzzer rings a prompt when responding to the action;
4. When the flow exceeds 200l, the reset lamp is always on and the buzzer rings once. Prompt that the filter element must be replaced. Replace the filter element and press and hold this key for three seconds to count the flow again. When responding to the action, the buzzer rings once.
Technical parameters:
1. Rated power: 2000W
2. Rated voltage: 220ac / 50Hz
3. Standby power consumption: < 0.5W
