Function Description:
1. 25 gear temperature control, VR gear ion, push independent gear;
2. Press and hold the power button for 2 seconds to start the machine, start heating, and the red LED flashes. When the temperature is stable, the red LED stops flashing;
3. Long press the push key, press the maximum temperature gear to control the temperature, the green LED flashes, and the green LED stops flashing when the temperature is stable;
4. Rotate VR to control the temperature corresponding to the corresponding gear;
5. Resistance wire heating, TO-92 thyristor heat sink processing technology;
6. Judging the power supply voltage, different voltages and different driving frequencies ensure that the resistance wire is controlled with constant power;
7. In case of open circuit or short circuit in NTC, the heating body immediately stops heating, and the LED display is abnormal;
8. No operation after startup, automatic shutdown after 60 minutes;
9. The reserved interface can adapt to the independent temperature regulation of high-grade or low-grade before the whole machine leaves the factory, and the proportion change of middle grade and so on.
Technical parameters:
Applicable voltage: 100-240V / AC
Operating frequency 50 / 60Hz